Radiaint 12V Oil Extractor Pump — Electric Oil Change Transfer Pump, 60W Battery-Powered Fluid Extractor for Cars, Motorcycles, RVs, Boats, Trucks & Lawn Equipment — No Jack, No Ramps, No Mess

- CHANGE OIL WITHOUT GETTING UNDER THE CAR – No jack, no ramps, no drain plug. Just insert the suction hose through the dipstick tube and pump the old oil out from above. A cleaner, faster, stand-up oil change you can do in your own driveway.

- STRONG & STEADY 60W MOTOR – Powered by your 12V battery (5A draw), the pump moves 0.8–1.0 L (about 1 quart) of oil per minute with steady, consistent suction. Compact at 8" x 7" x 4" and just 1 lb, it fits easily in your trunk or toolbox.

- SET UP IN 1 MINUTE – Connect the inlet and outlet hoses, clip the red clamp to the positive (+) terminal and the black clamp to the negative (–) terminal, then press the switch. That's it – no tools, no complicated setup.

- FOR BEST RESULTS, WARM THE OIL FIRST – Run the engine for a few minutes until the oil reaches 104–140°F (40–60°C), then turn the engine off before pumping. Warm oil flows faster and pulls out more of the dirt and sludge.

- WORKS ON ALMOST ANY ENGINE – Ideal for cars, trucks, motorcycles, RVs, boats, ATVs, scooters, tractors and lawn mowers. Suitable for gasoline and diesel engine oil.

- COMPLETE KIT, READY TO USE – Includes the pump, 59" (1.5 m) outlet hose, 47" (1.2 m) inlet hose, 2 hose clamps and 2 battery clips.

- IMPORTANT SAFETY NOTES – For engine oil only. Do NOT use with gasoline, fuel, water, transmission/gear oil or any flammable liquid. Do not run for more than 30 minutes at a time; let the pump rest for a few minutes after every 10–20 minutes of use. Do not add extension hoses, as this reduces suction.